Maybe there’s some interplay between amd64 and x64 architectures.

AMD64 and x64 are the same thing. Do you mean AMD64 and x86? There is definitely interplay there, as AMD64 implements the x86-32 instruction set.

You mentioned ham radio — definitely fun! It’s a process to get into it though, as you need to study/pass an exam, and then you need a radio. Radios range from cheap ($25 or so) in the VHF/UHF (“walkie talkie”-style) to more expensive for an HF rig ($1000 range for 100W HF). If you want to get into low power (“QRP”) it can be much cheaper. You also need a fair amount of space for a good antenna setup…

There are tons of different communication modes, some without a computer and, like you mentioned, some that use computers. wsjtx and fldigi are popular programs.

Good luck!

Newer macOS is not Unix certified.

It’s UNIX 03 compliant https://en.m.wikipedia.org/wiki/Single_UNIX_Specification

One or two Linux distros were (are?) UNIX certified, though.

Haha yeah that was the counter example I was thinking of. I agree completely — you could make a Gentoo from source beginner distro, and I think you could make it reasonably “idiot proof,” but it would still be a bad user experience most likely (too much time spent compiling).

If your distro can’t be forked into a “beginner distro” then it’s fundamentally flawed IMHO.

To be clear, I’ve used Arch as my daily drivers for a while, and while it’s not the best fit for my needs (I use Debian mostly), there’s nothing that I experienced that was incompatible with a “beginner” distro.

You can also drop cache for debugging by running something like echo 3 | sudo tee /proc/sys/vm/drop-caches

But remember that the kernel knows best — this RAM will automatically be freed up when needed and you should never run this except for debugging (or maybe benchmarking).

I’ve been super happy with it. Knock on wood it’s been super reliable. I have a single ZFS drive, take snapshots with various retention policies, nothing fancy.

Another fun thing is to set up a reverse proxy on it as an endpoint for services on your local (home) network which can only be accessed by VPN. For example, my Jellyfin service isn’t public facing, but I didn’t want e.g. my parents to need to set up WireGuard. So instead they can point their TV to a raspberry pi on their network to access the service — even a first gen RPI can handle Jellyfin reverse proxy over WireGuard for moderate bitrates!

WireGuard, and an external HDD. Run at a remote location for off-site backup.

I do this with a raspberry pi 3 at the in-laws. I copied the data over locally before setting it up, and after that it’s just nightly incremental rsync, which is fine even over my slow (35Mbps) upload.

I would bet that if you remux BBB to an mkv and play that through JF, it won’t transcode — I think it will just remux it back to mp4. Just a guess…

Interesting — I wonder if it only displays the first reason for having to mess with the stream, e.g., if it’s really that it’s an unsupported container, video, and audio codec.

Possible to try playing an h264 mkv (maybe Big Buck Bunny)? Since your screenshot is h265 I wonder if it indeed needs to transcode because that’s unsupported (in addition to mkv).

unless everyone is using hardware acceleration

I think that’s what (almost) everyone does. My little N100 works just fine with QSV.

Is it definitely transcoding? JF can remix without transcoding iirc.

IIRC chvt is a privileged command, which makes sense (if an unprivileged user could execute this command they could effectively brick the computer for a local user).

That said, my understanding is that modern DE’s are given a lot of access, so presumably chvt is allowed (and in this case, is required because as others mentioned, password is required). So the only other option is to fail unlocked, which is all kinds of Bad.

awk(1)ward

FTFY

Verizon will tell you to fuck right off and will never unlock your device.

Will never unlock their device.

For very simple tasks you can usually blindly log in and run commands. I’ve done this with very simple tasks, e.g., rebooting or bringing up a network interface. It’s maybe not the smartest, but basically, just type root, the root password, and dhclient eth0 or whatever magic you need. No display required, unless you make a typo…

In your specific case, you could have a shell script that stops VMs and disables passthrough, so you just log in and invoke that script. Bonus points if you create a dedicated user with that script set as their shell (or just put in the appropriate dot rc file).

EulerOS, a Linux distro, was certified UNIX.

But OS X, macOS, and at least one Linux distro are/were UNIX certified.

IIRC Torvalds uses Fedora.

(Debian for me.)